CHECK OUT OUR NEW V2 Version of the classic F1 Light which comes with the PnP harness and DI built in!: https://sp3cbuilt.com/subiebros-v2-f1-led-rear-fog-light/
We present you with the full LED F1 Style Rear Fog. This light can be wired to work as just a brake, fog or running light or you can also include the F1 style flasher that will flash when the brake pedal is pressed.
You will need to check your local jurisdiction if the strobe function is legal for on road use if you chose to use it
You can optionally also get the flash switch (crimping required) which will allow you to turn on and off the flashing function. Check out our overview and unboxing video below. Note: The wire color's have changed. The RED wire coming from the rear fog light now controls the flashing function.
Plug and Play Harness - Makes it so that you don't have to tap into the factory harness! You just simply install it in between the factory harness connection and the tail light (also compatible with Tail and Turn module).
Dual Intensity Controller- Adds dual intensity so that you can have the F1 light as a running light (reduced brightness) then when you push on the brake it adjusts to full brightness.
ON/OFF Switch - Gives you the ability to toggle the flashing function of the rear fog light.
Comes with mounting bracket and hardware.
Red, Clear/Red, smoked or clear/matte black lens available.
Includes a 1 year warranty.
Fitment:
2015, 2016, 2017, 2018, 2019, 2020, WRX/STI
2011, 2012, 2013, 2014 WRX/STI Sedan
2013, 2014, 2015, 2016, 2017 XV Crosstrek
2012, 2013, 2014, 2015, 2016 Impreza
***Not Compatible with vehicles equipped with eyesight***
Professional installation is recommended, each light comes with a general wiring guide specific to which product options you selected.
Check out our demo and install video (Note that the YELLOW wire in the video has changed to RED coming from the rear fog light):
98 Reviews Hide Reviews Show Reviews
-
looks amazing! flashing is very bright...
was expecting an easy install, but my 2018 wrx ltd already had wiring going through the hole on the bumper on the drivers side...threw me off a bit.
-
Shine bright like a diamond.
Kick ass light, build quality is rad. The wires are permanently attached to the housing for easy of wiring from inside the trunk. Overall install was easy. Just be sure to wear eye protection for the dirt you’ll be knocking off from the underside of the car when removing the bumper clips. The wiring harness makes the light plug and play and works with LED reverse turn as tail setups too. There are two screws and two self tapping screws including for a secure fit on the inside of the bumper. The brightness levels matched up nicely.
-
Matte Black with Dual Intensity and Plug-n-Play Adapter
Super simple with the plug and play. No splicing needed. The dual intensity is worth it. I tried with and without, huge difference, and it wont piss off people following in traffic being blinded. Zero issues with the install. Can't recommend it enough if you want to change up your car with added functionality.
-
F1 style fog light
Don’t hesitate to purchase! Recently installed on my 15 WRX and looks amazing. Very satisfied and will purchase from subie bros again!
-
F1 style
awesome. fits perfectly and easy installation
-
Awesome light
Installed the light with the harness & switch. Super easy to install and set up. Maybe too 30 minutes, fits perfectly, and LOOKS AWESOME!
-
Easy install, nice touch
Installed on 2017 wrx (wrb). I maybe would have gone the smoked version because it is very red with the wrb color. You don't need help fishing wires up through trunk honestly. I tightened the screws as much as I could on the back of the bracket because I don't have any tools to do it properly, couldn't put a normal length screw driver in there because tank is in the way, so just heads up on that part.
-
F1 Rear Light
Great product... Bright and clear.... Easy to install with the subie bros harness... no splicing needed from the factory harness...
-
F1 light
this light is a high quality piece that looks great and adds a nice look to the rear of the car. My only displeasure with the item was the state of the wiring coming out of the back of the light. there are 3 wires that come out that provide evertthing it needs for brake, running, and the blinking part when you brake, but they are not wrapped. they are just 3 small wires that are out in the open. i solved this issue but just looming the wires myself. looks great and also helps when you go to clean all the wiring up at the end. not a dealbreaker in my opinion, but it would be nice to see those wires wrapped/loomed for future customers. would add a nice touch.
